[OpenBIOS] Re: [fb-d] next problem: keyboard.
Ronald G Minnich
rminnich at lanl.gov
Fri May 5 09:35:34 CEST 2000
On Thu, 4 May 2000, Jeff Garzik wrote:
> * The PM registers relating to keyboard are probably red herrings -- it
> appears you are only signalling that keyboard events should generate PM
> event interrupts, which isn't what you are looking for
yes, right, I said 'PM' but should have said 'function 3'
> * The Fast A20 bit (bit 1 of port 92 register) is logically combined
> with the input from the keyboard controller. (x-bus interface, a20gate
> signal) maybe that is significant, maybe not.
I never thought A20 mattered except for real mode addressing, am I missing
something here.
> * have you enabled X-BUS accesses (function 0, register XBCS 0x4E-4F)
yes
> * have you enabled the keyboard interrupt?
hmmm ... I'm still now sure how the heck I do this! Maybe the 'steenking
bios' code that programs the 8259s?
> * have you cleared the kbd interrupts (RIRQ, 0x60)
I put this in just now.
> * is the USB keyboard interface "stealing" the keyboard port for
> itself? (register C0-C1)
I don't think so. It defaults to 0 (Intel does manage to get "defaults to
0" right much of the time) ...
> * port 92 (P92) register mentions keyboard
This is the gross a20m# garbage, I don't think it affects us, but ...
> * possibly important bits: keyboard bit on DEVRESA register (function
> 3, bit 28, register offset 0x5C-5F) and DEVRESB register (function 3,
> bit 30, register offset 0x60-63)
yes, I have these on. These are what I called "PM" registers.
I'm going to try out the little loop that OpenBIOS uses for keyboard init
and see if I get anywhere.
thanks
ron
-
To unsubscribe: send mail to majordomo at freiburg.linux.de
with 'unsubscribe openbios' in the body of the message
More information about the openbios
mailing list