[openfirmware] r1017 - cpu/x86 dev/usb2/device/wlan dev/usb2/hcd/ehci

[svn at openfirmware.info]

Author: wmb
Date: 2008-12-04 10:18:06 +0100 (Thu, 04 Dec 2008)
New Revision: 1017

Modified:
   cpu/x86/fb8-ops.fth
   cpu/x86/occhksum.fth
   dev/usb2/device/wlan/usb8388.fth
   dev/usb2/hcd/ehci/bulk.fth
Log:
Removed some trailing whitespace so git won't complain.

Modified: cpu/x86/fb8-ops.fth
===================================================================
--- cpu/x86/fb8-ops.fth	2008-12-04 09:18:00 UTC (rev 1016)
+++ cpu/x86/fb8-ops.fth	2008-12-04 09:18:06 UTC (rev 1017)
@@ -207,7 +207,7 @@
 	 then
          ax        op: stos  \ Write it back
          cx            dec   \ Decrement pixel counter
-      0= until		     \ End inner loop 
+      0= until		     \ End inner loop
       si           di  add   \ increment adr to next line
       5 /n* [sp]   cx  mov   \ restore starting width value
       dx               dec   \ decrement height
@@ -235,12 +235,12 @@
    ax         3 #  shr  \ Convert to bytes
    ax  9 /n* [sp]  sub  \ Account for incrementing of byte pointer
                         \ item 9 is now the excess to add for the next scan line
-   
+
 \  4 /n* [sp]  bl  mov	\ Foreground
    3 /n* [sp]  bx  mov	\ Background
    6 /n* [sp]  di  mov	\ Screenadr - start address in frame buffer
    7 /n* [sp]  bp  mov	\ Height - character height in pixels
-  h# 0a /n* [sp]  si  mov 
+  h# 0a /n* [sp]  si  mov
 \ Fontadr - start address (of this char) in font table
 
 
@@ -254,7 +254,7 @@
          dx          dx   or
       0<> while
          8 #         dx   cmp
-         >  if			 
+         >  if
             8 #      cx   mov
          else
 	    dx       cx   mov
@@ -276,7 +276,7 @@
             ax         op: stos  \ Write to frame buffer
             cx             dec   \ Increment width pixel count
          0= until                \ Repeat until width count = 0
-      repeat       
+      repeat
 
       9 /n* [sp]   si   add   \ Next scan line in font table
       5 /n* [sp]   di   add   \ Increment frame buffer addr to next line

Modified: cpu/x86/occhksum.fth
===================================================================
--- cpu/x86/occhksum.fth	2008-12-04 09:18:00 UTC (rev 1016)
+++ cpu/x86/occhksum.fth	2008-12-04 09:18:06 UTC (rev 1017)
@@ -49,19 +49,19 @@
       ax ax xor
       op: ax lods
       ax dx add
-      0 # dx adc  \ Possible carry 
+      0 # dx adc  \ Possible carry
    then
 
    1 # bx test  0<>  if      \ Leftover byte?
       ax ax xor
       al lodsb
       ax dx add
-      0 # dx adc  \ Possible carry   
+      0 # dx adc  \ Possible carry
    then
 
    dx ax mov  d# 16 # ax shr  h# ffff # dx and  ax dx add  \ Add two halves
    dx ax mov  d# 16 # ax shr  h# ffff # dx and  ax dx add  \ Again for carry
-   dl dh xchg   \ Byte swap   
+   dl dh xchg   \ Byte swap
 
    si pop
    dx push

Modified: dev/usb2/device/wlan/usb8388.fth
===================================================================
--- dev/usb2/device/wlan/usb8388.fth	2008-12-04 09:18:00 UTC (rev 1016)
+++ dev/usb2/device/wlan/usb8388.fth	2008-12-04 09:18:06 UTC (rev 1017)
@@ -238,7 +238,7 @@
 \   6 field >rx-snap-hdr
 \   0 field >rx-data
 d# 22 +  \ Size of an Ethernet header with SNAP
-constant /rx-min  
+constant /rx-min
 
 \ >rx-stat constants
 1 constant rx-stat-ok
@@ -442,7 +442,7 @@
 : process-request  ( adr len -- )
    2dup vdump			( adr len )
    to /respbuf			( adr )
-   respbuf  /respbuf  move	( ) 
+   respbuf  /respbuf  move	( )
    true to got-response?	( )
 ;
 
@@ -1057,7 +1057,7 @@
 : (mesh-start)  ( channel tlv -- error? )
    " "(dd 0e 00 50 43 04 00 00 00 00 00 04)mesh"  ( channel tlv adr len )
    2swap swap  1  ( adr len tlv channel action )  \ 1 is CMD_ACT_MESH_CONFIG_START
-   mesh-config-set   
+   mesh-config-set
 ;
 
 : mesh-stop  ( -- error? )
@@ -1429,7 +1429,7 @@
    d# 221 c,            d# 14 c,
 
    \  OUI....................  type  subtyp vers  proto metric cap
-   h# 00 c, h# 50 c, h# 43 c,  4 c,  0 c,   0 c,  0 c,  0 c,   0 c, 
+   h# 00 c, h# 50 c, h# 43 c,  4 c,  0 c,   0 c,  0 c,  0 c,   0 c,
 
    \ ssidlen   ssid (set at 12)
    d# 04 c,   here 4 allot  " mesh" rot swap move

Modified: dev/usb2/hcd/ehci/bulk.fth
===================================================================
--- dev/usb2/hcd/ehci/bulk.fth	2008-12-04 09:18:00 UTC (rev 1016)
+++ dev/usb2/hcd/ehci/bulk.fth	2008-12-04 09:18:06 UTC (rev 1017)
@@ -151,7 +151,7 @@
 : alloc-ring-qhqtds  ( buf-pa /buf #bufs -- qh qtd )
    0 swap  0 ?do		( pa /buf #qtds )
       >r 2dup cal-#qtd >r 	( pa /buf r: #qtds this-#qtds )
-      tuck + swap		( pa' /buf r: #qtds this-#qtds ) 
+      tuck + swap		( pa' /buf r: #qtds this-#qtds )
       r> r> +			( pa' /buf #qtds' )
    loop				( pa' /buf #qtds' )
    nip nip  alloc-qhqtds	( qh qtd0 )